STALCO ODŚNIEŻARKA AKUMULATOROWA SBS40BL 20V

Producent — dane kontaktowe

STALCO
Ofiar Katynia 1
32-050
SKAWINA
PL
centrala@stalco.pl
696113253

Informacje o bezpieczeństwie

List of snow blower safety warnings based on the requirements of General Product Safety Regulation (EU) 2023/988 (GPSR): 1. Preparation for work: Check that all components are properly fastened and in good technical condition. Make sure there are no children, animals or other bystanders around. 2. Protective clothing: Always wear appropriate protective clothing, including glasses, gloves, and sturdy footwear. 3. Starting and working: Do not start the snow blower in an enclosed room. Work in a well-lit place, avoid steep slopes and uneven terrain. 4. Principles of safe work: Do not direct the snow blower towards bystanders. Do not leave the snow blower on unattended. 5. Maintenance and repairs: Turn off the snow blower and wait for it to cool down before proceeding with any maintenance or repair activities. 6. Storage: Store the snow blower in a dry and safe place, out of reach of children. 7. Fuel: Use appropriate, certified fuel designed for this type of equipment. 8. Risk of injury: Watch out for moving snow blower components such as the rotor and snow ejector. Do not bring your arms or legs close to these elements while the device is running. Keep a safe distance. 9. Threat of discarded items: Make sure that there are no stones, branches or other objects in the work area that could be discarded by the snow blower. 10. Overload: Do not overload the snow blower trying to remove too much snow at once. Work gradually to avoid blocking or damaging the device. 11. Electric snow blowers: For electric snow blowers, make sure the power cord is in good condition and not damaged. Avoid using extension cords, and if necessary, use only those designed for outdoor use. 12. Cleaning the blocked rotor: If the rotor locks, turn off the snow blower, disconnect from the power supply (for electric models) or remove the key from the ignition (for combustion models), wait for all moving parts to stop, then use the tool (e.g. stick) to remove the obstacle. Never use your hands.