Koszt wysyłki: od 6,00 zł
Numer katalogowy: ALP-17361779972
Kod producenta: SCH03P01001
Stan magazynowy:
Kod EAN: 5902004732503
Stan produktu: Nowy
WIERTARKA UDAROWA 710W
Symbol: SCH03P01001
Funkcje:
DANE TECHNICZNE:
✅ wiercenie z udarem,
✅ wiercenie bez udaru,
✅ uchwyt SOFT
✅ Napięcie: 220-240V
✅ Moc znamionowa: 710W
✅ Obroty bez obciążenia: 0-3100r/min
✅ Uchwyt kluczowy: 1.5-13mm
✅ Max. średnica w betonie: 14mm
✅ Max. średnica w stali: 13mm
✅ Max. średnica w drewnie: 25mm
✅ Certyfikaty: CE GS EMC ROHS
✅ Przewód/wtyczka: 3m PVC H05RN-F 2x0.75mm²
✅ VDE, wtyczka VDE
✅ Waga: 1.5KG
List of drill safety warnings based on the requirements of General Product Safety Regulation (EU) 2023/988 (GPSR): * Please read the instruction manual carefully before using the drill. Improper use can lead to injury. * Always use safety glasses and work gloves. They protect against chipping and cuts. * Make sure the drill bit is properly fixed and matched to the material you will be drilling. Incorrect selection of the drill can damage the drill or cause injury. * Do not use the drill in humid environments or in the rain. There is a risk of electric shock. * Avoid drilling into materials containing asbestos. Asbestos is bad for your health. * Check the status of the power cord before each use. A damaged wire can cause electric shock. * Do not use a drill with or without damaged components. They ensure the safety of use. * Always disconnect the drill from power when replacing the drill or performing other maintenance activities. * Do not overload the drill. Work in moderation and let it cool if necessary. * Hold the drill firmly while drilling. Loss of control can cause injury. * Do not touch the rotating drill bit. There is a risk of injury. * Avoid drilling near electrical wiring or gas pipes. There is a risk of electric shock or explosion. * Store the drill in a dry and safe place, out of reach of children. * Clean the drill regularly and maintain according to the instruction manual. This will ensure its efficiency and safety of use. * If you notice any irregularities in the operation of the drill, immediately stop working and consult the service.
SCHMITH POLSKA S.A
KULICE UL.SZKOLNA 4
83-130
PELPLIN
PL
kontakt@schmith.pl
696113253
Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.
Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszym sklepie zaloguj się na nie, jeżeli nie załóż bezpłatne konto i napisz recenzję.