Koszt wysyłki: od 6,00 zł
Numer katalogowy: ALP-18154773294
Kod producenta: 76649
Stan magazynowy:
Kod EAN: 5905947951130
Stan produktu: Nowy
Waga: 0,10 kg
Taśma malarska STALCO PERFECT WASHI PRECYZYJNA 3-pak 38 mm × 50 m (S042176649) to zestaw trzech profesjonalnych taśm z papieru ryżowego (washi), przeznaczonych do precyzyjnych prac malarskich, dekoracyjnych i wykończeniowych.
Cienki, elastyczny papier washi oraz klej akrylowy o kontrolowanej sile przyczepności gwarantują doskonałe przyleganie, czyste, równe krawędzie bez podcieków farby i łatwe usuwanie bez śladów kleju.
Zestaw zapewnia wysoką wydajność i dokładność przy każdym projekcie, zarówno w pracach wewnętrznych, jak i zewnętrznych.
Zalety produktu:
Zastosowanie:
Specyfikacja techniczna:
List of safety warnings for assembly tapes based on the requirements of Regulation (EU) 2023/988 on general product safety (GPSR): 1. Risk of falling: Make sure that the surface on which you stick the tape is clean and dry. Improper surface preparation can lead to weakened adhesion and fall of fixed objects. 2. Load: Do not exceed the maximum load of the belt. Overloading the tape can cause it to break and damage the attached objects. 3. Weather conditions: Avoid using tapes in extreme weather conditions (high humidity, extreme temperatures). They can affect the effectiveness of gluing. 4. Surface Material: Check that the tape is suitable for the material on which it is to be used. Some materials can react with the adhesive, causing damage. 5. Application: Apply the tape evenly, avoiding air bubbles and creases. Incorrect application can reduce the adhesive strength. 6. Disassembly: Disassembly of the tape can damage the surface. Always carefully remove the tape, following the manufacturer's instructions to avoid damage. 7. Kids: Keep the tape out of reach of children. There is a risk of swallowing small parts. 8. Skin contact: Avoid prolonged contact of the adhesive with the skin. This can cause irritation. 9. Storage: Store the tape in a dry and cool place, away from direct sunlight, to prevent loss of adhesive properties. 10. Testing: Before full assembly, test the tape on a small, invisible area to make sure it does not cause surface damage.
STALCO
Ofiar Katynia 1
32-050
SKAWINA
PL
centrala@stalco.pl
696113253
Nikt jeszcze nie napisał recenzji do tego produktu. Bądź pierwszy i napisz recenzję.
Tylko zarejestrowani klienci mogą pisać recenzje do produktów. Jeżeli posiadasz konto w naszym sklepie zaloguj się na nie, jeżeli nie załóż bezpłatne konto i napisz recenzję.